continous or stitch welded for mot!!!!!!!!!!!!!!

View previous topic View next topic Go down

continous or stitch welded for mot!!!!!!!!!!!!!!

Post by redminijim on Sat Aug 03, 2013 4:09 pm

Hello all, so my pick up failed the mot silent , now theres a suprise . brakes , bodywork etc etc. So here is my question.Do you have to do a continuos weld when fitting a  sill to pass the mot or can you stitch welded?  Arrow affraid or in my case pigeon splatter;) 
avatar
redminijim
Member

Male Number of posts : 20
Location : norwich
Registration date : 2012-12-12

Back to top Go down

Re: continous or stitch welded for mot!!!!!!!!!!!!!!

Post by redminijim on Sat Aug 03, 2013 5:48 pm

Hello all, so my pick up failed the mot , now theres a suprise . brakes , bodywork etc etc. So here is my question.Do you have to do a continuos weld when fitting a sill to pass the mot or can you stitch weld it? or in my case pigeon splatter;)
avatar
redminijim
Member

Male Number of posts : 20
Location : norwich
Registration date : 2012-12-12

Back to top Go down

Re: continous or stitch welded for mot!!!!!!!!!!!!!!

Post by Project79 on Sat Aug 03, 2013 5:56 pm

If say continuous then just grind it all flat
avatar
Project79
Member

Male Number of posts : 167
Age : 25
Location : frettenham, norwich
Registration date : 2010-04-26

Back to top Go down

Re: continous or stitch welded for mot!!!!!!!!!!!!!!

Post by redminijim on Tue Jan 28, 2014 11:25 am

i did this and used body sealant over high patches , it did the trick , thank you
avatar
redminijim
Member

Male Number of posts : 20
Location : norwich
Registration date : 2012-12-12

Back to top Go down

Re: continous or stitch welded for mot!!!!!!!!!!!!!!

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum