project 17
Page 8 of 8 • Share •
Page 8 of 8 •
1, 2, 3, 4, 5, 6, 7, 8
Re: project 17
We have had another play today....
Now fitted the handbrake cables and quads, fitted the brake pipes and built up the rear drums with new cyclinders, brake shoes, bearings and springs. we also started to fit the Exhaust....
Now fitted the handbrake cables and quads, fitted the brake pipes and built up the rear drums with new cyclinders, brake shoes, bearings and springs. we also started to fit the Exhaust....
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Re: project 17
nearly there now then get that mot booked want to see it on the road looking good for stanford hall

mr t- Member
-
Number of posts: 412
Location: loddon
Registration date: 2009-03-12
Re: project 17
mr t wrote:nearly there now then get that mot booked want to see it on the road looking good for stanford hall
We all do........
It should have been finished 3 months ago.......
But lets not go there.........
Going to book MOT for next friday.........
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Re: project 17
Yet another good day today...
Young Dan (from stalham) and I fitted the clutch slave and bled down..
We also made the last of the brake lines and fitted then bled them down only to find we had 3 small leaks,
after sorting them out P17 has fully working brakes and clutch..
We also started what can only be described as "spaghetti junction" under the bonnet....
We fitted more or less everything including the inlet the spi carb, ECU and all the wiring to starter motor, coil, spi etc...
Almost ready to turn the key..........
Big "thank you" to woody for all the help today..
Young Dan (from stalham) and I fitted the clutch slave and bled down..
We also made the last of the brake lines and fitted then bled them down only to find we had 3 small leaks,
We also started what can only be described as "spaghetti junction" under the bonnet....
We fitted more or less everything including the inlet the spi carb, ECU and all the wiring to starter motor, coil, spi etc...
Almost ready to turn the key..........
Big "thank you" to woody for all the help today..
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Re: project 17
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Re: project 17
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Re: project 17
I have got to take back t comment given several months ago which were THE COLOURS WILL CLASH . THAT LOOK BLOOMING MARVLESS UNDER THERE and when its that clean it s easyer to keep it that way . but I bet we know who it will be 

wingnut- Member
-
Number of posts: 262
Location: norwich
Registration date: 2008-10-23
Re: project 17
looking good. but I think you maybe missing a couple of bits from under the bonnet
or is this a new air cooled mini???
or is this a new air cooled mini???
Re: project 17
wingnut wrote:I have got to take back t comment given several months ago which were THE COLOURS WILL CLASH . THAT LOOK BLOOMING MARVLESS UNDER THERE and when its that clean it s easyer to keep it that way . but I bet we know who it will be
Cheers Wingnut....
Yes craig....more air flow....lol.... not put rad in yet.....
Got number plates on now and fitted mirrors to.. just tyres to sort on monday and the rest of electrical stuff to sort out..

Just incase you forgot what it looked like before....??
_________________
A mini is for DRIVING 3000 mile in one go should do.....
then we could go to www.classicminipitstop.co.uk or email: minipitstop@orange.net

gumball- Mini Addict
-
Number of posts: 1007
Location: right hand side...driving.
Registration date: 2008-09-23
Page 8 of 8 •
1, 2, 3, 4, 5, 6, 7, 8
Permissions of this forum:
You cannot reply to topics in this forum








